Hi,
I believe I've come across a bug in EOS (Nomad) when a Manual Time fader is involved.
Usually, all fader position updates are sent out via OSC. But when a fader is set to "Man Time", this doesn't happen.
If I move a fader on Tab28, no updates get sent out -- except for:
/eos/fader/1/5, Double: 1
or
/eos/fader/1/5, Double: 0
And that's only when the fader goes to zero, or transitions from zero to something else.
Other types of faders (Cue lists, subs etc) immediately send out fader values (and correct ones) when a fader on Tab28 is moved.
When the faders are driven externally (from Luminosus), after about half a second of the fader having come to a stop, EOS feeds back "0" or "1" again. So with motor faders, putting the fader anywhere other than zero, it'll jump to 100% after letting go of it.
Discovered initially on Nomad v2.8.3 (Windows). Retested on 2.9.0 (Windows), the problem still exists.
Have checked the 'known issues' part of the release notes, but I don't think this problem is listed.
Cheers,
Daniel
