Paradigm Wall Station control from console

this can be done with UDP strings *IF* paradigm is prepared for this. that usually means calling the installer of the paradigm and having them do some re-programming of the paradigm.

(PS: the current software for the element console is 2.9.1; element gained a lot of new functions especially with 2.6, but with all others as well. i'd suggest updating when production schedule allows, but plan for some time to get re-adjusted to the console and its new functions)

this can be done with UDP strings *IF* paradigm is prepared for this. that usually means calling the installer of the paradigm and having them do some re-programming of the paradigm.

(PS: the current software for the element console is 2.9.1; element gained a lot of new functions especially with 2.6, but with all others as well. i'd suggest updating when production schedule allows, but plan for some time to get re-adjusted to the console and its new functions)

Thanks! I will look into the UDP functions to do this (and hopefully find some examples). I did the original Paradigm config a while back for them but don't know if paradigm is prepared for that - I don't remember doing anything special in the config for that.  Updating the console software after the year-end holiday schedule is on the list for them as well.