• State Not Answered
  • Date
    CND Studio
  • Date
  • Replies 1 reply
  • Subscribers 185 subscribers
  • Views 526 views
  • Users 0 members are here

Matching Movers

I have four Stinger spots 11 ch in four corners of my black box that is running an ETC element. I am wondering if there is a way to get them all "paired" so when one moves all three move to the same area on the floor? Does this make sense, and is it even possible?

Parents
  • 0

    This is currently not possible since to do this, the console would need to be aware of the 3D position of your lights. There will be an update to version 3.0 soon, that will add such functionality.

    For the moment you would have to prepare focus palettes. This are special memories that store pan/tilt values. So for each position you want to use you need to manually move all 4 movers to this point and record a focus palette. When moving the lights in "paired" mode you wouldn't manually move the lights anymore but rather recall the respective focus palette that has the four pan/tilt values

Reply
  • 0

    This is currently not possible since to do this, the console would need to be aware of the 3D position of your lights. There will be an update to version 3.0 soon, that will add such functionality.

    For the moment you would have to prepare focus palettes. This are special memories that store pan/tilt values. So for each position you want to use you need to manually move all 4 movers to this point and record a focus palette. When moving the lights in "paired" mode you wouldn't manually move the lights anymore but rather recall the respective focus palette that has the four pan/tilt values

Children
No Data
Related

www.etcconnect.com