Flashing LED Lights

I have multiple LED’s on and when I try to change the color (they seem to be content at a light blue) they keep flashing and I do not know how to fix this. They are currently on non dim channels and on the ion board they are patched as dimmable. I’m assuming the problem has something to do with my patching but I’m pretty new and don’t know how to fix it. Thanks

Parents

0 Geoff Crisp over 4 years ago

First question is what fixtures are they? Are they addressed and patched correctly? Conections I gather are constant power (not from a dimmer at full) and DMX cable.

If they are a budget fixture is there a strobe setting in the intensity parameter like 0-75% ints and then 76-100% strobe?

This is where I would start looking. Let us know a little more info.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Mary m over 4 years ago in reply to Geoff Crisp

They are d40 lustr+ and they all appear to be patched and addressed correctly. They are wired with DMX and for some we are daisy chaining the power but other are connected straight to non dims. I’m not entirely sure about constant power but their control mode is currently dimmable. There is no strobe setting and if there was it is not working for all the different colors.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Mary m over 4 years ago in reply to Geoff Crisp

They are d40 lustr+ and they all appear to be patched and addressed correctly. They are wired with DMX and for some we are daisy chaining the power but other are connected straight to non dims. I’m not entirely sure about constant power but their control mode is currently dimmable. There is no strobe setting and if there was it is not working for all the different colors.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data