Nomad Connection Issues

If you click on the {Troubleshoot} button on ETCnomad, does it list your Ion as an available master? If so, select it in the list, then click {Change Master}. If it does not show up, there are some additional things to check:

• Make sure both devices are running the same language/keyboard language.
• Can the Ion ping your Mac?
  • If not, then your IP settings are not correct.
• Make sure MultiConsole is enabled in Shell>Settings>Network>Interface Protocols
• Do you have Firewall enabled on your Mac?
  • If so, are you able to turn it off?

IPs are correct and Multiconsole is enabled on both.

I decided to let my Nomad sit on searching for master and after about 5-10minutes, it decided to connect and sync, though the connection was very slow. ..?

Any ideas what might be causing this sporadic behaviour and slow connection?

It's running though a gigabit TP-Link switch and into a (consumer) router /WAP. 

When you say WAP, does that mean that you're connections through WiFi? This isn't officially supported...

When you say WAP, does that mean that you're connections through WiFi? This isn't officially supported...

I have been connecting over WiFi, yes. I was unaware this is unsupported. I'll have a go with an Ethernet dongle tomorrow, though I'm still curious what's causing such bad performance over WiFi, I've had it work perfectly on 2.8 

WiFi is inherently half-duplex. There is a lot of latency switching between sending and receiving. The multiconsole protocol is chatty and requires a lot of handshaking. It wants (needs?) full-duplex.