Issue in patch with [channel] @ + [address]

i know this doesn't solve this bug, but the "official" workflow to add another address to a dimmer is patching the channel to another address and the console will add it:

1 @ 2/101 enter

1 @ 2/201 enter

will get you chan 1 part 1 = 2/101, chan 1 part 2 = 2/201

i know this doesn't solve this bug, but the "official" workflow to add another address to a dimmer is patching the channel to another address and the console will add it:

1 @ 2/101 enter

1 @ 2/201 enter

will get you chan 1 part 1 = 2/101, chan 1 part 2 = 2/201

it's funny that you say that - I thought that would work, and I'm sure it did in the past, however at the time I was patching setting a second address for a channel in that manner was replacing the original. But testing in nomad now it's back to normal. I'm not sure whether I had a funny setting set, or am just going mad!

you were trying this with channel type Dimmer?

for other types you have to add the part:

1 Type SolaFrame 750 enter
@ 2/101 enter

Part 2 Type SolaFrame 750 enter
@ 2/201 enter