Timing Disable on ION running as client for EOS

I'm running my ION as a client for my EOS right now (ver 1.4.4) when I try to activate timing disable from the ION I get "Cue 1/ Error: Number Out Of Range"

I'm starting with a cleared command line and pressing [fader controls] {time disable} and [Load] at the same time.

Is there a different way I should be accomplishing this?

-Bryan

Parents

0 Eagle Eye over 16 years ago

I've never tried to do it that way but I have written a macro on the Eos and then triggered it from the Ion with no problems.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Eagle Eye over 16 years ago

I've never tried to do it that way but I have written a macro on the Eos and then triggered it from the Ion with no problems.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 Anne Valentino over 16 years ago in reply to Eagle Eye

On Ion, currently, Hold down fader controls. Press and release the timing disable button. With fader controls still depressed, press the load key.

This will get easier in 1.5, where the fader controls key will be sticky. So, you'll press and release fader controls, press timing disable and load together. This makes the UI more consistent with Eos.

Hope that helps.

a
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel