Timecode Start via OSC

I think the easiest way to do this is likely learning the start and stop into macros, and then having an OSC string fire those macros to start and stop the time.

/eos/cmd/=Event 1 / Internal Enable #

/eos/cmd/=Event 1 / Internal Disable #

I tried putting these into Qlab but it said that it was not a valid OSC Command. 

what would that macro have to look like? Sorry I am just geting into all of this...

I don't know QLab, but this is valid OSC syntax.

hmm okay do i have to edit it at all? or should i just be able to coppy and paste the text

When I send the command through QLab Eos says "=Event - Syntax Error

I don't know QLab works. You are trying to send:

/eos/cmd

with a string of

Event 1 / Internal Enable

as the argument

i got it to work. Had to use /eos/newcmd/sc/Event_1/Internal/enter/

It basically just toggles the internal on and off. Now i need to find a way to reset the clock and start at 00:00:00:00

Try:

/eos/newcmd/sc/Event_1/Internal/Enable/enter/

/eos/newcmd/sc/Event_1/Internal/Disable/enter/

/eos/newcomd/sc/Event_1/Time/0/enter

I just figured that out too. Just had to have qlab send /eos/newcmd/sc/Event_1/Time/0/enter/

That works even better!!! Thanks so much!