Can anyone please tell me how I may run Nomad on one PC and grandMA2 onPC / Ma3d on the other? The two Pcs have Ethernet cards and connect the same router. I need to know what to configure in MA2 as Nomad has an address of 10.0.0.1 for the visualizer in built. All help gratefully received.
If somebody still have that problem: https://youtu.be/i3lQ8EfF_rA
Thank you Lars. One issue that did arise is the possibility of the firewall running on the second PC running MA2/MA3D not registering to allow communication through from the PC running Nomad.
So it is the Win10 PC? In Settings (Press Win + I) in network you can change your network type to private. This open mosts ports your programs need. If it is in public mode, it can be closed/locked.
Yes, it was Win10. The firewall entries to allow EOS Nomad and grandMA2 to pass through should be registered either at product install time or on first invocation of the product.
I do not understand the question. What do you ask for? How can I help you?
Sorry Lars, it wasn't a question - it was just a comment about what could cause the failure of Nomad connecting to MA2/MA3D which might be useful to anyone following this conversation.
Thanks for your help.