Record Part Cue MACRO

first of all, you can use a max of 20 parts, so part 99 will not work.

i would work with two cuelists, that are linked. cuelist 1 for LX, cuelist 2 for AV

with [Cue] 1 [/] {Execute} [Cue] 2 [/] [Enter] you can link them.

to make sure the right channels end up in the right cuelist you can use cuelist partitions.

in setup make two new partitions, say 1 and 2.

then [Cue] 1 [/] {Partition} 1 [Enter], same for cuelist 2.

first of all, you can use a max of 20 parts, so part 99 will not work.

i would work with two cuelists, that are linked. cuelist 1 for LX, cuelist 2 for AV

with [Cue] 1 [/] {Execute} [Cue] 2 [/] [Enter] you can link them.

to make sure the right channels end up in the right cuelist you can use cuelist partitions.

in setup make two new partitions, say 1 and 2.

then [Cue] 1 [/] {Partition} 1 [Enter], same for cuelist 2.