running thru cues in time zero

You can recreate the "cut" key by writing a macro that says:

[go to cue] [next] [time] [0] [enter]

Hope that helps.

-M

Shaun,

Try holding the Timing Disable button while pressing Go.

Cheers, B

You can also putting timing disable on the fader by pressing [Timing Disable] + [Load] - you'll see a "TD" indicator, telling you that you've disabled timing.  Press combo again to remove condition.

Hope that helps.

a

thank you .  I will give all 3 a try

How do you do this with an Ion?

On the Ion, Timing Disable is found in the softkeys after pressing the "Fader Controls" key.  Then from here, like the Eos, bress Timing Disable and the load button for the apporiate fader

What I've done on the Ion is to create a macro as Anne described, then display direct selects so you have a cut and back.

I come from the Strand 520i as well and had the saaaame complaint, but solved it that way ^

Later,
-T-Rex 

I believe [TimingDisable]&[Go] doesn't work in 1.4.x - but it does in 1.5.

[TimingDisabled]&[Load] should work in 1.4.x, however.

Ah, sorry - on Ion, TD&Go will be enabled in 1.5. On Eos, it works in the current release.

-luke-