I have used Dataflash units on a Strand 530 and have copied out the effect information (see below), now I would like to recreate the same effects on an Eos but can't figure out how to do it. Can anyone help please?
| FX 1 | |||||||||||||||||||
| step | Time | 201 | strobe duration | shutter strobe | 202 | strobe duration | shutter strobe | in | dwell | out | |||||||||
| 1 | 0 | 100 | 0 | 0 | 100 | 0 | 0 | 0 | off | 0 | |||||||||
| 2 | 0.8 | 100 | 50 | 50 | 100 | 30 | 30 | 0 | 0.8 | 0 | |||||||||
| 3 | 0.6 | 100 | 11 | 8 | 100 | 20 | 15 | 0 | 0.6 | 0 | |||||||||
| 4 | 0 | 100 | 0 | 0 | 100 | 0 | 0 | 0 | off | 0 | |||||||||
| fwd chase / LTP / fade up and down 0 / 1 cycle | |||||||||||||||||||
| FX 2 | |||||||||||||||||||
| step | Time | 201 | strobe duration | shutter strobe | 202 | strobe duration | shutter strobe | in | dwell | out | |||||||||
| 1 | 0.5 | 0 | 5 | 5 | 0 | 0 | 0 | 0 | off | 0 | |||||||||
| 2 | 0.4 | 49 | 5 | 8 | 49 | 40 | 50 | 0 | 0.5 | 0 | |||||||||
| 3 | 0.5 | 100 | 5 | 0 | 100 | 5 | 0 | 0 | off | 0 | |||||||||
| fwd chase / IndHTP / 1 cycle | |||||||||||||||||||
| FX 3 | |||||||||||||||||||
| step | Time | 201 | strobe duration | shutter strobe | 202 | strobe duration | shutter strobe | in | dwell | out | |||||||||
| 1 | 0 | 100 | 0 | 0 | 100 | 0 | 0 | 0 | off | 0 | |||||||||
| 2 | 1 | 100 | 0 | 80 | 100 | 0 | 50 | 0 | off | 0 | |||||||||
| 3 | 0 | 100 | 0 | 0 | 100 | 0 | 0 | 0 | off | 0 | |||||||||
| fwd chase / LTP / 1 cycle | |||||||||||||||||||
