• Date
    lukebacon
  • Date
  • Replies 5 replies
  • Subscribers 186 subscribers
  • Views 10433 views
  • Users 0 members are here

Adding channels to a fader wing?

Is there a way of adding (selected) channels, rather than subs or cues to the fader wing on an Ion? When I try to do it as would seem intuitive - by selecting channels (e.g. [1] [Enter] ) and pressing both buttons of a fader to load, I get an 'invalid sub number' message - which would seem to indicate that it isn't possible?

Should there be a way of doing this without making individual subs for the channels I want on faders?

Thanks.

Parents

  •  I was going to say that if  you are resigned to using Subs, and if your Faders are configured as such, and if  the channels are at full already, You could record them with one less keystroke.  (e.g [1 Record [desired sub's bump button ]], but I was surprised to see that while it works on EOS faders, it doesn't on the fader wing.

    I was also surprised to see that the above syntax would add onto an existing Sub instead of replacing. I would have that would be Update instead.

    Sorry...



    [edited by: BSmith at 5:46 PM (GMT -6) on Tue, Jun 16 2009]
Reply

  •  I was going to say that if  you are resigned to using Subs, and if your Faders are configured as such, and if  the channels are at full already, You could record them with one less keystroke.  (e.g [1 Record [desired sub's bump button ]], but I was surprised to see that while it works on EOS faders, it doesn't on the fader wing.

    I was also surprised to see that the above syntax would add onto an existing Sub instead of replacing. I would have that would be Update instead.

    Sorry...



    [edited by: BSmith at 5:46 PM (GMT -6) on Tue, Jun 16 2009]
Children
No Data
Related

www.etcconnect.com