Bug? Timecode Show Learn Button for start Learn-Mode not work

Question

I'm trying to record a time code show. For this I would like to start the learn mode. I press the learn button but nothing happens. If I start the learn mode via softkey, everything is ok. In this case, the Learn button also lights up green and I can exit Learn mode by pressing the button. But do not start again via the button. 
 When I try to learn Marcos with the Learn Button, the button works. 
 GIO with EOS 3.0.2 Build 6

Matt Pumplin · Answer

I think I see the problem. You probably have to re-select the Event List you want to be learning after you get back to the Show Control List. 
 So let's say you are Learning while your Live is in focus (Show Control not focused). You cannot stop Learning until you get Show Control back in Focus. Once you stop Learning, your command line might read 
 BLIND: Event 12: 
 You press the [Learn] button and see red text 'Learning' right above the command line because the console is prompting to create a Macro. 
 Instead, select the Event List, press enter, then press [Learn] like this: <Event> 2 [ / ] [Enter] [Learn] 
 and now you'll be learning for Event List 2.

You could also Disable, then Enable Internal or External Time Code on that list - that will select the List# for you also, so your command line will read 
 BLIND: Event 1 / : Event 1 /Internal Enable * 
 Then you can press [Learn]