Gobo options in ML controls are 1 off from actual Mytho lights

i just had a ruff look at the webside and the fixture.

couldn't find any thing unusual.

Sources:

Fixture: Clay Paky Mythos - standard [30]

https://www.claypaky.it/en/products/mythos#gobosfilters

EOS v3.0.1

Lib v3.0.1.12

Can you varify that your goboweel is as it is in the manual?

And that the Fixture finds the "Home position" correctly.

I've verified that the actual Static GOBO wheel in the Mytho2 light fixtures as 1 less full circle of varying size (6 not 7) which then throws off the following GOBO's by one until late in the wheel a different GOBO pattern shows up that does not appear in the ML console display that that bring the reminding follow on GOBO's back inline with the ML Console display.

Is there a way to update the ML Console display with a different GOBO Wheel? If we can determine which Wheel is in the fixtures.

I've verified that the actual Static GOBO wheel in the Mytho2 light fixtures as 1 less full circle of varying size (6 not 7) which then throws off the following GOBO's by one until late in the wheel a different GOBO pattern shows up that does not appear in the ML console display that that bring the reminding follow on GOBO's back inline with the ML Console display.

Is there a way to update the ML Console display with a different GOBO Wheel? If we can determine which Wheel is in the fixtures.

I can see the stock wheel has one extra than the Mythos 2 gobo pdf.

https://www.claypaky.it/media/documents/Claypaky_Mythos_Mythos2_GobosAndFilters.pdf

In Patch you can select the channels in question, go to Attributes, and then change the gobo wheel for Gobo Select 1. If you select the existing wheel and use the {Copy} softkey, you can then remove the offending slot.

I believe this answer is exactly what I was looking for. I have the ETC software loaded on my home computer with all of the current patches from the theater. I selected a Mytho2 channel. Then when to "Patch" & selected "Attributes". The current "Gobo Select" selection is "Clay P Gobo 29". I believe the correct Gobo is "Clay P Gobo 52". They are both very similar. With just a few differences. Differences that I think we have. I will verify this in the Theater later today. I will follow up after. I'm still in the early learning phase & you have opened up a new area of control I had not ventured into yet. Thanks.