Record CUEONLY/TRACK

Mike, regardless of the Track/Cue Only setting, out of sequence cues are replayed in their entirety.  The only exception to this is looped cue.  When you are running a looped sequence, only the moves are recalled on the loop back, unless you assert the first cue in the loop sequence.

Does that help?

a

Mike, regardless of the Track/Cue Only setting, out of sequence cues are replayed in their entirety.  The only exception to this is looped cue.  When you are running a looped sequence, only the moves are recalled on the loop back, unless you assert the first cue in the loop sequence.

Does that help?

a

Not exactly.  Say that I make a change on Cue 7.5 and re-record/cueonly/enter.  Because I'm going from Q6 > 7.5 > 7 > 8  when I go from 7.5 to 7 channels are on or off that I didn't make changes to in Q7.5.  So I'm wondering if because I'm going "out of order" sequentially that it messes up the "tracking".  I thought that when I  did "Record Cue 7.5 CueOnly Enter" that changes would only affect that cue and not track forward.  Am I missing something?  I came from 8-9 years on Express/Expression 3 consoles, so the Record, RecordOnly, Update, Track/CueOnly concepts are still somewhat confusing to me:-)

 "when I go from 7.5 to 7 channels are on or off that I didn't make changes to in 7.5."    But are they stored in cue 7?  Can you send me your showfile and tell me the channels that you are concerned about?

Cue Only prevents changes tracking forward - always.   The order should make no difference - because any out of sequence cue (via a Go To command, linking, or from loading a new cue into pending) are always replayed in the entirety.  Moves and tracks.

a