Using Nomad and Porthport sACN and RDM compatible nodes, how do I patch by device list? The box in the upper right of the screen shows no in or out activity. Where to begin first in troubleshooting?
Thanks much,
Zach
Using Nomad and Porthport sACN and RDM compatible nodes, how do I patch by device list? The box in the upper right of the screen shows no in or out activity. Where to begin first in troubleshooting?
Thanks much,
Zach
At the moment, RDM only works with ETC Gateways (Net3/Response/Response Mk2), as the network communication part is proprietary. There is now a new(ish) standard RDMnet (E1.33) which provides the missing link to allow an ETC network device (like Nomad or Concert) to configure RDM devices attached to a gateway from another manufacturer. However, at present neither Eos or Pathway support RDMnet in their products.
At the moment, RDM only works with ETC Gateways (Net3/Response/Response Mk2), as the network communication part is proprietary. There is now a new(ish) standard RDMnet (E1.33) which provides the missing link to allow an ETC network device (like Nomad or Concert) to configure RDM devices attached to a gateway from another manufacturer. However, at present neither Eos or Pathway support RDMnet in their products.
www.etcconnect.com