• Date
    Palmi Jonsson
  • Date
  • Replies 4 replies
  • Subscribers 189 subscribers
  • Views 850 views
  • Users 0 members are here

Effect restarts when Go is pressed, Repeat on Go is disabled

My intensity effect will restart, or jump to a different point in the cycle when Go is pressed on the next cue after the cue with the effect.

Q241.5 - Effect applied
Q241.8 - No further move instructions on the channels - Intensities jump to a different point in the effect cycle

No subsequent cues have this behaviour.

Repeat on Go is disabled

Parents

  • if the effect is running on a different channel order in the .8 cue this can look like the effect restarting for no reason. and the same for a change in effect variables (if it's an absolute or stepbased effect.

  • in reply to ueliriegg

    And also if you renumbered the second cue.  There's currently a bug where if you move a cue it will create a new instance of any effects running in it.

    Regardless of why it's broken, you can fix it like this: Sitting in 241.5, select the channels that are running that effect ([Group][Effect][X][Enter]), then {Make Manual} and use [Record Only][Through][241.8][Enter][Enter].  That will blast through any move instructions in that sequence and fix your issue.

Reply
  • in reply to ueliriegg

    And also if you renumbered the second cue.  There's currently a bug where if you move a cue it will create a new instance of any effects running in it.

    Regardless of why it's broken, you can fix it like this: Sitting in 241.5, select the channels that are running that effect ([Group][Effect][X][Enter]), then {Make Manual} and use [Record Only][Through][241.8][Enter][Enter].  That will blast through any move instructions in that sequence and fix your issue.

Children
No Data
Related

www.etcconnect.com