Snapshots need to be recalled twice

I ask in April for some Attention to Views and Snapshots..
community.etcconnect.com/.../is-it-possible-snapshot-views-need-some-attention

Without specific examples to verify, it sounds like you may be referring to EOS-49059: Snapshots do not suppress PSD Target Status Bar on first activation.

Hi, That is one problem I see on some occasions (not always). Another specific example is that the amount of rows and columns on a Custom Direct select tab is often not correct in the first recall.

I have a small window with only 5 custom direct selects (5 columns wide, 1 row high), but it often recalls as a 10x10 

I have seen this caused by [EOS-48306] Snapshot of Direct Selects on non-visible tabs are not set up correctly on first recall

That happens when the Snapshot is stored while the DS is not visible, either because it's "behind" another tab when the Snapshot was made, or if it was in a different Workspace when the Snapshot was made.

It is nice you have a solution for this.
But,.... this one Problem is not the only Problem with Snapshots....