Convert to zero-full data

Hello Aki,

can you give an example.

I can't figure out what you mean.

yours
thilda

Hi Mathilda,

One of our customer wants to convert previous Compulite Vector show file to Eos show file manually one by one.
Becouse Vector show file doesn't convert directly to any file format.
The customer already purchased 5 Apex cosole, and previous show file reprograming on Apex.

So, Varilite VL1KAS Pan/Tilt data is 0 to 100 % data on Compulite Vector.
VL1KAS Pan/Tilt user range modify to 0 to 100 % in fixture editor, then patch and programing.
Finally, selecting channel type to original VL1KAS.
We expecting see the converted degree data, but only original parcent data will displayed.

Hi Mathilda,

One of our customer wants to convert previous Compulite Vector show file to Eos show file manually one by one.
Becouse Vector show file doesn't convert directly to any file format.
The customer already purchased 5 Apex cosole, and previous show file reprograming on Apex.

So, Varilite VL1KAS Pan/Tilt data is 0 to 100 % data on Compulite Vector.
VL1KAS Pan/Tilt user range modify to 0 to 100 % in fixture editor, then patch and programing.
Finally, selecting channel type to original VL1KAS.
We expecting see the converted degree data, but only original parcent data will displayed.

Did you check that Preserve Native is set to Enabled when you change the fixture type from the modified profile to the original profile?