Connecting iRFR to Eos/ION/Element offline on a mac.

I am going to revive this old topic as I'm having the same problem.

My MacBook is connected to my wireless hub via my ethernet with the IP address for the router as 10.101.124.101, and for the mac manually set as 10.101.1.101

My iPhone is connected to the wireless network with the static IP of 10.101.125.101

When I load the iRFR, I enter the IP address of the desk as 10.101.90.101, but it cant find the desk.

Having read the topic above I have the 'TCP RFR Listening on Port 3031' in the diagnostics window. I also have the 'Enable' button ticked on the setting from the ETC Family Window. What I cant find is the IP setting for the EOS offline to check I'm entering them on my iPhone correct.

Please help, as I would love to get to use the iRFR before getting behind the real desk next week.

Thanks,

Alex

I am going to revive this old topic as I'm having the same problem.

My MacBook is connected to my wireless hub via my ethernet with the IP address for the router as 10.101.124.101, and for the mac manually set as 10.101.1.101

My iPhone is connected to the wireless network with the static IP of 10.101.125.101

When I load the iRFR, I enter the IP address of the desk as 10.101.90.101, but it cant find the desk.

Having read the topic above I have the 'TCP RFR Listening on Port 3031' in the diagnostics window. I also have the 'Enable' button ticked on the setting from the ETC Family Window. What I cant find is the IP setting for the EOS offline to check I'm entering them on my iPhone correct.

Please help, as I would love to get to use the iRFR before getting behind the real desk next week.

Thanks,

Alex

Can your MacBook connect to the desk with no probs?

I dont get behind the desk until next week. So haven't tried it.

I was setting up the show on the offline editor and was hoping to try out the iRFR on the offline before hand.

Thanks,

Basic, but since you listed all of your other IP settings...

Is the subnet on all of your devices 255.255.0.0? 

Or you can also try putting all of the devices into the same subnet. so just make them 10.101.90.101 and 102 and 103

Alex,

Unless I'm misunderstanding, you're trying to connect the iRFR to your MacBook to use it offline, yes?

If so, you should enter the address of the MacBook (10.101.1.101) for the console address in the iRFR application.  You said you entered the address of the desk (10.101.90.101).  EOS offline uses the IP address of the device it is running on, which in this case is your MacBook.

I hope this helps-

Todd