Multi Playback on screen display highlight

Hi,

It sounds as if you want to select all of the active channels in a playback.  On the Ion you can do this by holding down the [Select Last] key and then using the {Select Active} or {Select Manual} soft keys to select the channels that you need.

This will work for all of the channels that are currently active, but I am not sure about only the levels from one particular cue or playback.

HTH 

Hi,

It sounds as if you want to select all of the active channels in a playback.  On the Ion you can do this by holding down the [Select Last] key and then using the {Select Active} or {Select Manual} soft keys to select the channels that you need.

This will work for all of the channels that are currently active, but I am not sure about only the levels from one particular cue or playback.

HTH 

There currently isn't a way to do this, but it is a good idea and now "on the list."   We will probably use the Query function for this purpose.  

Thanks!

a

Ta Anne

just to clarify this is purely just a on screen hilight thing that I was thinking of not a channel select command.

cheers

Smiley

MTC

When you use a query, this results in highlighting the channels. You can then choose to select them all, or next/last through the highlighted channels until you reach the one you want. 

:-)

a