• State Suggested Answer
  • Date
    johnnypanic
  • Date
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 186 subscribers
  • Views 9890 views
  • Users 0 members are here

Go to cue out option....

Hello Anne,

 

I was wondering if there is a plan in a future release to have toggle capability for the go-to-cue-out command between being a global and user-level command.  We have a network with an ION, ION RPU, and an EOS set up for teching a show (ION for conventionals with scrollers and the EOS for the VLs) and discovered that it was global yesterday. It seems that in some show situations it would be good to have the capabilities of go-to-cue out (lamps out and home positions for devices) without affecting the other programmer.

Thoughts?

Thanks,

Chris

Lighting Designer/ETC Rep

Parents
  • 0

    I dont know if this would help you, but have you considered partitioned control? Having the conventionals on one partition for the Ion, and the other partition for the VL's on the Eos. That would assure Go to Cue out would just be for the particular fixtures you are working on.

  • 0 in reply to Brian Webber

    Brian,

     

    Thanks for the suggestion but, unfortunately, this is a system where we have partitions in use.   That's actually why we were confused that a go-to-cue-out on one console affection the fixtures that were partitioned exclusively to the other console.  We then called phone support and confirmed that the go-to-cue-out function is global and is not limited by partitions.  While nowhere near the end of the world in terms of an issue, it seems that having the ability to toggle this between global and partitioned control (or perhaps just partitioned control-wise) would be great.

     

    Please tell Mr. Munn hello from San Diego.

     

    Chris

Reply
  • 0 in reply to Brian Webber

    Brian,

     

    Thanks for the suggestion but, unfortunately, this is a system where we have partitions in use.   That's actually why we were confused that a go-to-cue-out on one console affection the fixtures that were partitioned exclusively to the other console.  We then called phone support and confirmed that the go-to-cue-out function is global and is not limited by partitions.  While nowhere near the end of the world in terms of an issue, it seems that having the ability to toggle this between global and partitioned control (or perhaps just partitioned control-wise) would be great.

     

    Please tell Mr. Munn hello from San Diego.

     

    Chris

Children
Related

www.etcconnect.com