There is no connection between the Eos system and the Emphasis Server. Emphasis Servers are only compatible with Express, Expression 2x and 3 and Insight 2x and 3 consoles.
What are you looking to do? There is no interaction between EOS and Emphasis control systems. Both units will interact on the NEt2 data stream to share control of Dimmers and Node outputs. Perhaps if you can give us a little more information as to what your intention is Sarah and I can assist you further.
Eos can connect directly to WYSIWYG now using the ETCNet2 interface. If you are looking to visualize with Eos, the best way is to use any visualization software that can "speak" ETCNet2.
Otherwise, you can use any visualizer that speaks DMX, however you will need a Net3 DMX Gateway to get the DMX out of the Eos console.
Eos can connect directly to WYSIWYG now using the ETCNet2 interface. If you are looking to visualize with Eos, the best way is to use any visualization software that can "speak" ETCNet2.
Otherwise, you can use any visualizer that speaks DMX, however you will need a Net3 DMX Gateway to get the DMX out of the Eos console.
