• Date
    erock
  • Date
  • Replies 2 replies
  • Subscribers 185 subscribers
  • Views 4794 views
  • Users 0 members are here

Multiple Cue Lists

Hi,

I have two cue lists in my show, cue list 1 is under the control of the master GO/Stop buttons, is it possible to make cue list #2 "active" so that it can be controlled by these same buttons? 

 

Thanks
Eric 

Parents

  • Are you looking to trigger both cuelists from the same Go button simultaneously? Or just place Cue list 2 in the Main Playback?

    For the former you could use the syntax Cue 1/ Execute Cue 2/

    This will depend on the Q numbers being the same in each QList. Alternatively on a cue by cue basis - Cue 1/1 Execute Cue 2/5 etc etc...

    For the latter: Cue 2/ Enter followed by the Load button on the Main Playback will load QList 2 into that playback

     

    Hope that helps

Reply

  • Are you looking to trigger both cuelists from the same Go button simultaneously? Or just place Cue list 2 in the Main Playback?

    For the former you could use the syntax Cue 1/ Execute Cue 2/

    This will depend on the Q numbers being the same in each QList. Alternatively on a cue by cue basis - Cue 1/1 Execute Cue 2/5 etc etc...

    For the latter: Cue 2/ Enter followed by the Load button on the Main Playback will load QList 2 into that playback

     

    Hope that helps

Children
Related

www.etcconnect.com