• State Not Answered
  • Date
    madorangepanda
  • Date
  • Replies 7 replies
  • Subscribers 185 subscribers
  • Views 6363 views
  • Users 0 members are here

ION: Making some simple Cyc fades.

Hello, I'm new to the ION console and would like some help to do the following.

I have a groundrow and flown row each consisting of 6 4 cell cyc battens. It can be assumed that they only use 8 different dimmer channels (1 per colour)

I would like to create some very slow fading sky colours for Dawn, Day, Dusk and Night skys.

As the show progresses most of the time I would like the cyc to continue it's fade, irrespective of the rest of the lighting state. Then on certain cues I would like the cyc to rapidly progress to the next state I.e. Dawn into Daytime.

Any useful info appreciated.

 



[edited by: madorangepanda at 6:05 PM (GMT -6) on Sun, Feb 21 2010]
Parents
  • 0

    In theory you could do it off one cue list, maybe using multipart cues as the desk keeps long cues running in 'background', but using a second cue list for the cyc makes most sense, as it makes it easier to work out why the cyc is doing something unexpected during the tech.

    Remember to Assert the cues where you want a rapid fade just to be safe.

    Cheers

    Richard

     

Reply
  • 0

    In theory you could do it off one cue list, maybe using multipart cues as the desk keeps long cues running in 'background', but using a second cue list for the cyc makes most sense, as it makes it easier to work out why the cyc is doing something unexpected during the tech.

    Remember to Assert the cues where you want a rapid fade just to be safe.

    Cheers

    Richard

     

Children
  • 0 in reply to RichardJ

    I second Richard's suggestion, but using discrete times on the long-fade channels, rather than parts - it works a charm. A five-minute fade on them continues uninterrupted by subsequent cues. For those spots when you want your cyc to jump to a level, I think that simply putting manual values in that cue will work, but Assert is definitely a good idea there.

     

    John

  • 0 in reply to jmusarra

    Question for the crowd...

    With 2 cue lists, during tech if somebody calls a hold, you will have to press stop/back on your second list (assuming you have it mapped to a wing), so that you can attempt to keep the cyc look in time with the rest of the show.

    Using discreet timing or parts... when you press stop / back with background channels running, do they stop as well, or only the channels from the most recent cue?

    Just curious as I don't think I've ever run across it, or paid enough attention to background channels. But I do totally agree with Brent and John. If the show is called 100% the same there, keeping it down to 1 cue list is simpler depending on your tech style and if the background channels do stop with a Stop/Back command.

  • 0 in reply to travisres

    Benjamin,  That was a good question that I didn't know the answer to, so I checked it out.

    In one cue list, the first press of the Stop/back key stops all channels from that list.  At that point a press of the Go button resumes all moves in the correct timing.  A second press of the stop/Back key will dump you into the last executed cue overiding any incompleted moves.  I confess that I wouldn't know how to resume a long, half-finished background fade from that point. 

Related

www.etcconnect.com