Magic sheet fixtures showing levels

did you use built-in symbols for the incandecents? and did you tick the fill color to be linked to the channel's intensity?

I'm wondering if I will need a different set of buttons on the magic sheet just for the intensity of the incandescents??

did you also choose a fill color? the dynamic intensity will move from black (at 0%) to the chosen color (at 100%). so if you chose black fill color you'd probably see nothing change.

I think it defaulted to white but let me check that...

It looks like default white fill color. Strange that it works on the LED fixtures, even when they are set for white, but not on the incandescents.

this one works. so what's different?

this one works. so what's different?

I used the ETC fresnel outline that is slightly different. It may be the Source 4 LED fresnel (no notch at back). I will correct this and retry.

Once I zoomed it in, I could see it is identical to that one, has the color button set to white, and the intensity link showing for the surround. I noticed the FILL color was indeed BLACK, and that is the issue!

Thank you so much for your help with this!!

Or just use the intensity field to show the value? This profile symbol is imported from autocad ...