Dear all
I am using a fog machine in a theater play. The machine only needs to smoke for 1s in the whole play.
I want to use only one cue for starting and stopping the smoke, so I do that as follows:
C10: Fog=0
C11: Fog=100, Time 1s, Fading Curve (see below)
C12: Fog=0
I use a fading curve as follows:
0 at 0, 1 at 100, 99 at 100, 100 at 0
This gives a nice pulse, where the smoke will be active during the fade and be off after the fade. This works well in the cue list.
When I am now in Cue 11 and when my cue has finished its fade, the smoke is off as expected from the curve.
When I use [go to cue] 0, the smoke will be at 100 rather than at 0. This is, because [go to cue] 0 does not home the NIP.
Is it the intened behaviour, that the console does not respect the cue fade curve for NIP, when go to cue 0 or is this a bug?
I am working on a ION and using EOS 3.1.5.8
Best,
Marco