Ayrton Diablo S Pan Issue

Question

Using the Diablos in a show where I want to be able to put the fixture at 90 degrees (or -90) and tilt from there. 
 I have been sending it to 0,0 then {Pan}[90] but when tilting across the stage it is clearly off and not traveling a straight path. 
 Anyone have an idea? I can't tell if it is a fixture problem or a profile problem

eos moderator · Answer

If you're saying that Pan 90 isn't 90&deg; away from Pan 0 you should check the Pan range. The Diablo has a setting to use either 540 or 630&deg;. The number there has to match the number in the Eos fixture profile.