Can’t save moving light cue

Have you ruled out subs, effects, marks, and anything else obvious that can also contribute to its position in that cue? For example, if the light's intensity is off in that cue and you're bumping its intensity with effects, it will sometimes mark to the next cue's location to prevent lit moves. In Live Table does it have any markers on it that would indicate what's going on?

Have you ruled out subs, effects, marks, and anything else obvious that can also contribute to its position in that cue? For example, if the light's intensity is off in that cue and you're bumping its intensity with effects, it will sometimes mark to the next cue's location to prevent lit moves. In Live Table does it have any markers on it that would indicate what's going on?

The values for the channels are all marked ‘n’ Null?  Don’t know how to clear that?  Assuming I did something to the “look” in the cue after 

There are two ways you get those N's:

• Filters
  Do you have red text in your parameter category buttons?
  
  If you have filters like that open the CIA, click the {Filter} button, {Clear Filter} and {Apply Filter}
• {Make Null}
  If it wasn't filters you can try this: Chan 1 {Make Null} Enter (where channel 1 would be one of the channels with an N).

Does that help?

That worked. The red “filtered” notice was on.  Turned it off and Cues can be saved. 

this community is great.