Problem with Creating a Fixture Profile

Question

Hello- 
 
 I have created a 11ch fixture profile for the Rockville Stage Matrix 36 Fixture with no problems. I also created the 108ch profile so I have the capability of choosing to control each bulb, but it is not behaving correctly, and I am trying to figure out what I might have done wrong. Attached is what Rockville has listed for their dmx channels and part of what I have on the fixture profile in Eos. When I bring up the first Red nothing happens until I bring up "intensity" on the ML control (which is showing as virtual in my fixture profile). But when I bring the intensity up, it brings up multiple of the bottom lights instead of the first light. I know I may need to contact Rockville, but I am just seeing if someone sees something wrong with my profile. Thank you!

eos moderator · Answer

This would be simpler as a multi-cell fixture: a master with Intens and 36 mastered cells with RGB each. 
 It can be done with parameters but there are two challenges: 
 
 Eos doesn't have 36 individual RGB parameters in the parameter list (the highest ones are Red 25, Green 25 and Blue 25) 
 With this structure you can't use the color picker for anything but the first pixel.