Gio@5 not controlling NIPs

Question

Howdy yall. I am a student working as a master electrician on a show and all of the NIPs on our GIO@5 aren&rsquo;t working. Our LD was working in the afternoon and I came in, powered up and everything was working. I then let the board op take over and as far as I know and what she&rsquo;s saying is that nothing out of the ordinary happened. But the board when cues are fired are not remembering any NIPs and seemingly imputing random ones. I&rsquo;m happy to answer further questions but we&rsquo;re kinda at a loss. Thank you in advance

eos moderator · Answer

Go to Blind and have a look at one of the cues that's misbehaving. Do you see small grey capital N's?

In this case it's probably a filter that was applied to the cuelist. 
 Type [Cue] 1 [/] {Properties}. In the CIA you will see the properties for cuelist 1 show up: 
 
 Have a look at the parameter filter in the last column. 
 Please let us know what you find, thank you.

eos moderator · Answer

You're welcome to send the showfile to eos(dot)moderator(at)etcconnect(dot)com, or to get in touch with our hotline. You can find those contacts here .