I'm trying to hook up an ETC ion xe to be used with Unreal Engine. I'm not receiving the DMX command over ethernet. So, I hooked up wireshark and I enable acn protocol, but I'm not seeing any DMX command on the network inside wireshark.
Thank you.
Hanna
i had a short look and i thought i had seen it differently in the past, but could also be my Setup.
That is my universe 1, starting some where in line 00a0 at the second block.
As you can see in the picture, there are 3 universes beeing send.
Each universe is send with the IP 239.255.0.[universe No] as an UDP package.
i had a short look and i thought i had seen it differently in the past, but could also be my Setup.
That is my universe 1, starting some where in line 00a0 at the second block.
As you can see in the picture, there are 3 universes beeing send.
Each universe is send with the IP 239.255.0.[universe No] as an UDP package.
