Hi all,
Running an APEX5 on vrs. 3.2.6 bld 29.
Pixel map to Creamsource Vortex 8 in mode 35 rgbw cct 16 bit connected via SACN direct.
I was originally getting partial Mapping to some of the pixels on the heads, after a reboot nothing. I see no change in the SACN signal while my VMS is active and no output at the heads.
For reference my fixtures are at full with their color parameters zero'd as well as both my server at full with -100 crossfade and layer fixtures at full. No trouble with FX, playback, or manual control of fixtures.
Anyone experience this?
