AutoMark and Follow Times.

One thing you could do is put the move data in cue 3 and put a delay on focus

So 

Cue 2 - ML's DSC @ 100%

Cue 3 - ML's DSC @ 0%, focus delay of intensity time

Cue 4 - ML's New Position @ 100%

That's certainly a viable work around Johanthan. I'll use it. Thanks . I'd sure like to know why the automark won't work from a follow though. 

Dan

Hi Dan,

I've just tried your cues, I've used 4 Mac700 (no that would make a difference)

Cue 2 - Macs position 1 @ 100%

Cue 3 - Mac @ 0%

Cue 4 - Macs position 2 @ 100%

This was done with AutoMark on, I then put a follow of 5seconds on cue 2 ran cue 2 which executed cue 3 which then AutoMarked once the intensities were at 0%.

Strange, not my job but if you need this quick I would be more than happy to take a look at your showfile and see if I can offer a second opinion (not trying to take away ETC's work ; )

johnathan.rainsforth at gmail.com

Feel free

Jay

Hi Dan,

I've just tried your cues, I've used 4 Mac700 (no that would make a difference)

Cue 2 - Macs position 1 @ 100%

Cue 3 - Mac @ 0%

Cue 4 - Macs position 2 @ 100%

This was done with AutoMark on, I then put a follow of 5seconds on cue 2 ran cue 2 which executed cue 3 which then AutoMarked once the intensities were at 0%.

Strange, not my job but if you need this quick I would be more than happy to take a look at your showfile and see if I can offer a second opinion (not trying to take away ETC's work ; )

johnathan.rainsforth at gmail.com

Feel free

Jay

Ok Jay. Sent it off to you.

Problem solved ! Thanks Jay !

All good,

Dan sent me the showfile and simple error that Q.2 focus information was also recorded into Q.3 which meant that Q.4 focus wasn't being marked.

All thats needed to be done was the focus info be taken out of Q.3 so it leaves the space for Q.4 to be marked when levels reach 0%

Sorry ETC if I stepped on anyones toes!

No worries, Johnathan! :) That's the beauty of a public forum.