Good afternoon!
I have a Gadget 2 (no CPU #) and I am getting a blinking Green light on the box while I'm in the EOS Program. I've updated firmware and all of that fun stuff. Any suggestions on what I missed?
Thanks for any help!
Jim
Good afternoon!
I have a Gadget 2 (no CPU #) and I am getting a blinking Green light on the box while I'm in the EOS Program. I've updated firmware and all of that fun stuff. Any suggestions on what I missed?
Thanks for any help!
Jim
Hi Jim,
according to the Gadget2 manual, blinking green means that there is data coming from/to USB Host (Eos) - so sounds like its working. Is the Gadget outputting DMX?
Hi Corey.
When I try and control the fixture in Nomad, it doesn't do anything anymore. And the green light continues to blink. I don't know what settings in the program I need to adjust, if any.
Can you make sure that the fixture is patched to an address, that DMX is an active protocol (Patch>Protocols), that the channel has DMX as protocol (Patch>Interface) and that the universe you used in patched is mapped to one of the ports of the gadget (Setup>Device>LocalOutput)?
Also: Do you use Hog on PC on the same computer, or do you have Concert open while trying to send DMX from Eos?
Can you make sure that the fixture is patched to an address, that DMX is an active protocol (Patch>Protocols), that the channel has DMX as protocol (Patch>Interface) and that the universe you used in patched is mapped to one of the ports of the gadget (Setup>Device>LocalOutput)?
Also: Do you use Hog on PC on the same computer, or do you have Concert open while trying to send DMX from Eos?
www.etcconnect.com