Hi ETC
recently upgraded my Ion's to 3.2.8. (from 3.2.5 and 3.2.6?)
(older units, both upgraded to the newer motherboard; original non- motorized fader wings, hard connected to the console, 2@ 2x10 wings and 1@ 2x20 wing).
Since the upgrade, the LCD displays on the fader wings are glitching when the Consoles power on.
the sub labels/numbers don't appear for first 2 subs on each wing. Moving the fader handle re-establishes the proper image (the labels appear)
always the first 2 faders. not always all 3 fader wings.
then once it was the middle faders, but with the ETC text still visible.
Thanks.
