Hi there,
I've discovered something unique when working with Y Focus in Blind. Normally, when I enter a value (22.9) it goes to the correct corresponding ft/in mark (22'9").
In an attempt to be more accurate, I was trying to use two digits past the decimal in the Y Focus Value (22.99) and it translates to 30'3".
Eos 3.2.9.16 on IonXe20 hardware
While it may be unexpected it actually is correct.
You're using Feet/Inches as setting
22.9 means 22 feet and 9 inches.
22.99 means 22 feet and 99 inches, which is 363 inches, which breaks down to 30 feet and 3 inches.
If you want to be able to use 22.9 to signify 22 feet plus .9 of a foot, you should be using the setting Feet rather than Feet/Inches.
Does this help?
While it may be unexpected it actually is correct.
You're using Feet/Inches as setting
22.9 means 22 feet and 9 inches.
22.99 means 22 feet and 99 inches, which is 363 inches, which breaks down to 30 feet and 3 inches.
If you want to be able to use 22.9 to signify 22 feet plus .9 of a foot, you should be using the setting Feet rather than Feet/Inches.
Does this help?
