Looking for Tips to Convert Gel Combinations to S4 LED Lighting on Eos

There are ways to mimic for instance a 4-cell tungsten cyclorama batten with LED fixtures. (Where you assign different gels to the 4 cells and mix intensities.)

But for this particular case I would put one S4 led on Lee 117 and one on Lee 202, look at the resulting color and make a new color palette with a third fixture.

Even better: let the designer make a new color palette as the quality of the light will be way different with a S4 led.

There are ways to mimic for instance a 4-cell tungsten cyclorama batten with LED fixtures. (Where you assign different gels to the 4 cells and mix intensities.)

But for this particular case I would put one S4 led on Lee 117 and one on Lee 202, look at the resulting color and make a new color palette with a third fixture.

Even better: let the designer make a new color palette as the quality of the light will be way different with a S4 led.

Yes, that's what I'll do; I was just wondering if there might be a magic tool to avoid that.

But thank you very much for your response.