Channel Selection with {Flash} and [Next] or [Last] results in Channel 1 getting selected and being unable to use [Next] and [Last].
Example:
<Chan> [5] [Thru] [10] [Record] [Group] [5] [Enter]
[Group] [5] [Enter]
[Next]
CMD_Line: "Group 5: Chan 5◆"
{Flash}
CMD_Line: "Group 5: Chan 5 Flash◆"
[Next]
CMD_Line: "Group 5: Chan 1 Flash◆"
Jumps to channel 1, which is not part of group 5, and then [Next] and [Last] do not work anymore.
Something simmilar happens if you write:
<Chan> [5] [Thru] [10] [Enter] [Next] {Flash} ...
EOS V3.2.10 Build 36
