Renumber Cue Lists

Here is a good work around let's say you program cue 1 thru 50 and then all of sudden you want them to be cue 100 

Go to blind and go cue thru 1thru 50 press " copy to " and DOUBLE PRESS so it goes move it on the Syntex when you move them to cue 100 they will renumber themselves 

It's handy if you are doing say cue 1.5 1.6 2.9 and then all of sudden you want them as cue 3 if you do cue 1.5 thru 2.9 and move them

it's will make cue 3 cue/4 cue/ cue 5 

That's the only workaround I have found 

You can also use the move too button when you are in the groups tab in blind it lets you rearrange. It's also handy for any DS pallets as long are you are in blind and it's correct tab . It would be nice moving forward you can do it on the DS pallets but the Syntex will say error sadly 

This is not correct.

When moving cues 1.5, 1.6 and 2.9 to cue 3 you will get cues 3, 3.1 and 4.4. When moving multiple cues the console keeps the distance between targets.

This is not correct.

When moving cues 1.5, 1.6 and 2.9 to cue 3 you will get cues 3, 3.1 and 4.4. When moving multiple cues the console keeps the distance between targets.