Arkaos MediaMaster Express, Ion, and Artnet

Ok then. . .  Apparently nobody at ETC or Arkaos can provide me with any help, and I have had no luck on either of the fourms. 

Artistic Licence provided me with a .pdf that made my head ache, but got me no closer to getting the connection to work (oddly it DID work when I was running AL's DMXWorkshop software)

Can anyone tell me just what the Ion is sending to Art-Net?

sorry for suggesting your question as an answer....clicked wrong button.

If you go to the shell in the Ion you can turn on art-net in the network category down near the bottom of the list.

When you patch the server you can also choose the Interface in the CIA.  Once you have the server and it's layers patched the Ion will be putting out the appropriate levels to art-net.  You have to remember that universe 1 = art-net univers 0 when patching.

One other thing to keep in mind is the Ion and the Arkaos computers need to be in the same subnet and ip address ranges so they can talk to each other.  

I hope this helps you out.

sorry for suggesting your question as an answer....clicked wrong button.

If you go to the shell in the Ion you can turn on art-net in the network category down near the bottom of the list.

When you patch the server you can also choose the Interface in the CIA.  Once you have the server and it's layers patched the Ion will be putting out the appropriate levels to art-net.  You have to remember that universe 1 = art-net univers 0 when patching.

One other thing to keep in mind is the Ion and the Arkaos computers need to be in the same subnet and ip address ranges so they can talk to each other.  

I hope this helps you out.