grey intensities, but not Null

Question

Hi ETC and everyone. 
 
 recently upgraded to 3.2.12.1 
 I've got 8 channels showing grey intensities of 25, but not the "N" for null. 
 I can't sneak them out. 
 they come up when the console boots up. 
 "About" shows a Value of 25, but the DMX output is 0 
 If I take the channels to full, the intensity rolls up; I can sneak the channel down to 0, but then the intensity jumps back to 25 
 they show the intensity of 25%, but the light doesn't actually come on. .. . . 
 I deep cleared the console and reloaded the show, but they came back. . . . 
 
 Thoughts? 
 the channels are typically controlled by subs (work lights and moving light non-dim channels) 
 the channels are patched to a Non-Dim at 50 profile (and i updated the profile when I upgraded the software) 
 
 Thanks. 
 Andrew

eos moderator · Accepted Answer

Thank you for the showfile. This indeed is a bug in the fixture library and was written up as [EOS-57097] and [FLH-14865]. 
 The fix is in all fixture library updates starting in 3.2.12.7. The current update can be downloaded here . After the update you will have to load the showfile, head to Patch > Fixtures and use {Update Profile} for the Non Dim At 50 profile.

grey intensities, but not Null

Top Replies