Using 2 Qlists with unexpected results when Qlist 2 Q1 runs with a delay timing

Question

Ion Classic running v3.3.0.549 - I'm using a Qlist 2 to change colours on certain fixtures (afternoon to evening scenario). Q1 in Qlist2 has a delay timing before the first colour change to Orange and subsequent colour changes have follow-on's from that Q number. When the Qlist 1 Q34 is fired it invokes Qlist2 Q1 and the delay starts fine. However, the Colour picker and fixtures show colour movement not expected as the timing for the colour change does not start until after the delay time has expired. 
 I have added the showfile to ask if anyone could explain/suggest why this is happening and what the remedy is please. 
 TIA. 
 Roger Rule of Thumb 2 Qlists 2025-10-06 15-05-48.esf3d

eos moderator · Answer

We looked at your showfile and the only thing we can see is a tiny jump in the color picker, but nothing on the output side. 
 You didn't specify a channel, we looked at channel 102. And in the showfile you uploaded cue 1/34 doesn't seem to trigger 2/1, so we pressed Go manually. 
 Is there any additional information you can provide? 
 Thank you