Direct Selects on External Touch Screen

I'm not on a puter with the OLE, but I believe (On Ion) if you press Expand on the DS page, it'll expand to 2 -2x10's, then use select to choose which palette you want.

You can open multiple tabs of DS's, as well as one in the CIA. 

After you've got it set up, record the displays as a Snapshot.

Steve B.

Bryan,

I agree. I believe I heard this will be addressed in 2.0, where you will be able to fit a lot more (and customize a lot more) on a full screen of direct selects.

Two sets of direct selects on external tabs is coming in 1.9.5.

:-)

a

Customizable Direct Select Screens in 2.0? :)

Bryan,

I ran into this at a console training a few weeks ago.

Open Direct Selects in a new tab.  Put that tab on the monitor with out the CIA.

Open another Direct Selects window but choose the "Upper Left of Console Display" or "Lower Left of Console Display"

This allows either 2 - 5x10 Direct Selects, 1 - 5x10 DS and 2 - 2x10 DS, or 4 - 2x10 DS all with independent Targets.

You can then quickly expand to show 5x10 of that particular target, and split back again to 2 - 2x10 with your previous targets.

You can then also open another DS in the CIA and get even more DS on your monitors, highly recommend TouchScreens if you are doing this!!

Seth