Is it possible to configure (say) faders 1 to 10 which carry subs 1-10 with recorded fade times and using Bump as the "Go" button so that if I bring in (say) fader 4 this way then any other active fader between 1 and 10 automatically goes down to

What I have done, which seems to work, is to set unused channels on each sub at O (not "off") and then select LTP in the submaster options. Initially I had set them to 1% so they were electrically "on", then thought why not 0%, and it worked. I am using an incandescent rig and realise that with leds and/or movers then this may not work. Also the whole show is being busked off the subs/faders so no memories involved.

What I have done, which seems to work, is to set unused channels on each sub at O (not "off") and then select LTP in the submaster options. Initially I had set them to 1% so they were electrically "on", then thought why not 0%, and it worked. I am using an incandescent rig and realise that with leds and/or movers then this may not work. Also the whole show is being busked off the subs/faders so no memories involved.