Go Back Cue Timing Issues

Nomad Programming Wing / EOS 3.3.5-69

When going back a cue sometimes it takes the cue time and sometimes it adds the intensity and non intensity times and adds them up. 

EG: Cue 29 has an intensity time of 6 and a color time of 6. When I press back from cue 30, it has a duration of 12 seconds and stops at our 0.0 (still in red). 

Master fader is proportional at full, LTP,  no executes, no rate change, no fader loaded with cue or rate. 

Thanks! 

Parents
  • 0

    This happens because of the move instruction for channel's 29 parameter Color Temperature.

    Since the channel is on for the first time in the cuelist in cue 30, when going back from 30 to 29 this channel's values need to be removed. To do this as cleanly as possible Eos first fades out the channel's intensity in the cue's intensity time, and only when the channel has faded out the color temperature fades to its home value which happens in the cue's color time.

Reply
  • 0

    This happens because of the move instruction for channel's 29 parameter Color Temperature.

    Since the channel is on for the first time in the cuelist in cue 30, when going back from 30 to 29 this channel's values need to be removed. To do this as cleanly as possible Eos first fades out the channel's intensity in the cue's intensity time, and only when the channel has faded out the color temperature fades to its home value which happens in the cue's color time.

Children
No Data
Related

www.etcconnect.com