Setup:
Eos w/ 1.9.whatever (the most recent update, too many numbers, too little attention span)
2 VL2500 Spots that had been initially in effects but have since had all effects removed for the preceding 5 cues (all of which are move cues, the first of which has an intensity change as well).
I have a 5 second cue in which the VLs are supposed to move (Tilt ~20º, Pan ~60º, nothing major), move the 2nd gobo wheel to drop in a prism, and begin spinning that prism.
What happens:
The VLs spend the entire 5 seconds doing the gobo wheels properly and smoothly, but not pan/tilting. In the Live Table display, the VL pan and tilt attributes are changing as though they are making a smooth pan/tilt, but the fixtures themselves do not move. Then, as soon as the cue finish, they jump to the new position.
Questions:
Is this a problem with the Eos, the VLs, or my programming? What is going on? Can the VLs not handle a simultaneous move/gobo change?
I've sent the last hour and half changing things, rewriting cues, and experimenting. Like I said, originally there were effects and I thought exiting the effects was the problem, but I've since removed the effects and it doesn't improve. I'm flummoxed.
