Hi there.
Two questions really.
We have some Apollo Color 7 Fan Controlled Scrollers. When we patch the fixture the Apollo_Color_7_fan but when we come to apply a fan curve the fan does not react to the intensity values also patched to that channel.
ie: when the intensity is @ FL the fan should be at full and visa versa. (the curve added in to the fan curve is an inverted curve (100=0 thru 0=100)
We have had to create our own group of fixtures using the generic fixture list
1 part 1= Dimmer @address 81
1 part 2= Scroller @address 2/01
1 part 3=Scroller_fan @address 2/02
also when we patch the Apollo Color 7 Fan fixture to the channel it doesnt atomatically add a dimmer part (like a VL1000ts) which would be useful.
Any ideas or thoughts would be helpful