Copy a channel to multiple cues

I don't know if this has been discussed before but I tried this on my Ion... [channel 101 Copy to Cue 10 through] gives me a syntax error. I thought you could do that, trying to copy one channel to multiple cues should be able to ( channel 101 copy to cue 10 through 20). 

I'm in live, running 1.9.1. 

Is there a different way of doing it? I'm pretty sure this can be done in Spreadsheet view in Blind, but I don't see why I cannot do it in live.

Parents
  • 0

    copy to in live is mostly for copying data from one channel to another channel.  If you want to change values in multiple cues it is best to do that in blind.  You can make the appropriate attributes manual and update the cues.  

    copying data in live does not store anything in the cues.

    ch 101 make manual

    select last update cue 10 thru 20

    It will kick a prompt telling you cue is not active. make sure you are updating the right cues and press enter.

     

     

     

Reply
  • 0

    copy to in live is mostly for copying data from one channel to another channel.  If you want to change values in multiple cues it is best to do that in blind.  You can make the appropriate attributes manual and update the cues.  

    copying data in live does not store anything in the cues.

    ch 101 make manual

    select last update cue 10 thru 20

    It will kick a prompt telling you cue is not active. make sure you are updating the right cues and press enter.

     

     

     

Children
No Data
Related

www.etcconnect.com